Compatible with below Pressure Washer Models#:
Ryobi R36XPWS26
Bosch GHP 5-13 C Professional
Bosch GHP 8-15 XD Professional
Lavor LVR5 145
Lavor LVR5 PLUS 150 DIGIT
Lavor PASCAL 23 PRO
Lavor VERTIGO 28 PRO
Lavor THERMIC 5 H
Kranzle PN 98K2020
Kränzle K1622 TS (Total Stop)
ARXP 170I(SKU: 15579)
LUTIAN LT701-2000A
LUTIAN LT701-2200A
LUTIAN LT701G-2100A
LUTIAN LT701G-2500A
LUTIAN LT701-2000B
LUTIAN LT701-2200B
LUTIAN LT701G-2100B
LUTIAN LT701G-2500B
LUTIAN LT703-2000A
LUTIAN LT703-2200A
LUTIAN LT703G-2100A
LUTIAN LT703G-2500A
LUTIAN LT703-2000B
LUTIAN LT703-2200B
LUTIAN LT703G-2100B
LUTIAN LT703G-2500B
LUTIAN LT703-2000C
LUTIAN LT703-2200C
LUTIAN LT703G-2100C
LUTIAN LT703G-2500C
LUTIAN LT704-2000A
LUTIAN LT704-2200A
LUTIAN LT704G-2100A
LUTIAN LT704G-2500A
LUTIAN LT704-2000B
LUTIAN LT704-2200B
LUTIAN LT704G-2100B
LUTIAN LT704G-2500B
LUTIAN LT704-2000C
LUTIAN LT704-2200C
LUTIAN LT704G-2100C
LUTIAN LT704G-2500C
LUTIAN LT707-2000A
LUTIAN LT707-2200A
LUTIAN LT707-2400A
LUTIAN LT707G-2100A
LUTIAN LT707G-2500A
LUTIAN LT707-2000B
LUTIAN LT707-2200B
LUTIAN LT707-2400B
LUTIAN LT707G-2100B
LUTIAN LT707G-2500B
LUTIAN LT707K-2000A
LUTIAN LT707K-2200A
LUTIAN LT707K-2400A
Mächtz Мойка высокого давления Mächtz MPW‑2058 X TURBO
Mächtz Мойка высокого давления Mächtz MPW-2257 TURBO
MICHELIN MPX150C 14525
F.F. GROUP HPW 145i PLUS
F.F. GROUP HPW 160i PLUS
F.F. GROUP HPW 150i PLUS
What’s New with PRO V3.0
1.Shaving Cream Foam Guarantee – if you use it with appropriate amount of quality shampoo and pressure washer.
2.New Bottle and Groove – with up to 1200ml volume inside but easier to grab the bottle.
3.New Material Applied – stainless steel material is more durable.
4.Anti-Leakage Cap – to prevent liquid leakage via bottle cap.
More Features since Version 2.0
MJJC Connection/Fitting – easier and faster to attach fitting, no need glue or PTFE tape.
MJJC Foam Technology – less noise, less soap but thicker foam.
MJJC Style Bottle – less possibility to tip over and easy to fill liquid into the bottle.
Before Purchasing the MJJC Foam Cannon Pro V3.0, Please Ensure the Following:
1.Check Your Pressure Washer's Operating Pressure
Your pressure washer must operate at a minimum of 50 BAR/725 PSI.
Each Foam Cannon PRO V3 comes pre-installed with a 1.25mm orifice, which is ideal for machines rated 110 Bar/1595 PSI ~ 150 Bar/2175 PSI.
Spare Parts in package:
A 1.1mm orifice, suitable for machines operating 90 Bar/1305 PSI ~ 110 Bar/1595 PSI.
A 1.35mm orifice, recommended for machines rated 150 Bar/2175 PSI ~ 280 Bar/4061 PSI.
If your pressure washer falls outside these three ranges, please refer to below range to purchase the appropriate orifice size for optimal performance.
What is the pressure range for each orifice?
· 0.9mm orifice: for 50 Bar/725 PSI ~ 90 Bar/1305 PSI pressure washer
· 1.1mm orifice: for 90 Bar/1305 PSI ~ 110 Bar/1595 PSI pressure washer
· 1.25mm orifice: for 110 Bar/1595 PSI ~ 150 Bar/2175 PSI pressure washer
· 1.35mm orifice: for 150 Bar/2175 PSI ~ 280 Bar/4061 PSI pressure washer
· 1.65mm orifice: for 280 Bar/4061 PSI ~ 340 Bar/4931 PSI pressure washer
2.Confirm Your Pressure Washer Type
This foam cannon is designed for use with Cold Water pressure washers only. It is not compatible with hot water machines.
3.How to Select a Correct Foam Cannon Model? Check Here.
How to Check if the Weighted Ball is Clogged
Please read these before you order!
When there is liquid inside the bottle.
Everytime you tighten the cap on bottle.
There will be 5ml - 10ml liquid comes out from the nozzle, adapter or top valve.
It is because the air pressure inside the bottle is higher than outside.
Air pressure pressed the liquid going up through the suction tube.
This feature is only available on Pro V3.0, because MJJC Pro V3.0 has an anti-leak cap and one extra 28mm thread inside.
