Compatible with below Pressure Washer Models#:
AVA Go P45 X-Large Bundle
AVA Easy P50 X-Large Bundle
AVA Go P55 Large Bundle
AVA Easy P40 X-Large Bundle
AVA Easy P57 X-Large Bundle
AVA Master P70 X-Large Bundle
AVA Master P80 Large Bundle
AVA Master P80 X-Large Bundle
AVA Evolution P60 Large Bundle
AVA Evolution P70 Large Bundle
AVA Evolution P80 Large Bundle
AVA Smart P50 Large Bundle
AVA Easy P50 Large Bundle
AVA Easy P50 X-Large Bundle
AVA Easy P57 Large Bundle
AVA Master P60 X-Large Bundle
AVA Master P80 X-Large Bundle
AVA Master 2.0 P60 Large Bundle
AVA Master 2.0 P60 X-Large Bundle
AVA Master 2.0 P80 Large Bundle
AVA Master 2.0 P80 X-Large Bundle
AVA Evolution P90 Large Bundle
AVA Go P40 X-Large Bundle
AVA Smart P50 X-Large Bundle
AVA Smart P55 X-Large Bundle
AVA Evolution P60 X-Large Bundle
AVA Evolution P70 X-Large Bundle
AVA V6 P90 Large Bundle
AVA Go P40 Large Bundle
AVA Go P50 Large Bundle
AVA Easy P40 Medium Bundle
AVA Smart P55 Medium Bundle
AVA Evolution P80 Medium Bundle
AVA Evolution P90 Medium Bundle
AVA Evolution P90 Large Bundle
AVA V6 P90 Large Bundle
What’s New with PRO V3.0
1.Shaving Cream Foam Guarantee – if you use it with appropriate amount of quality shampoo and pressure washer.
2.New Bottle and Groove – with up to 1300ml volume inside but easier to grab the bottle.
3.New Material Applied – stainless steel material is more durable.
4.Anti-Leakage Cap – to prevent liquid leakage via bottle cap.
More Features since Version 2.0
MJJC Connection/Fitting – easier and faster to attach fitting, no need glue or PTFE tape.
MJJC Foam Technology – less noise, less soap but thicker foam.
MJJC Style Bottle – less possibility to tip over and easy to fill liquid into the bottle.
Before Purchasing the MJJC Foam Cannon Pro V3.0, Please Ensure the Following:
1.Check Your Pressure Washer's Operating Pressure
Your pressure washer must operate at a minimum of 50 BAR/725 PSI.
Each Foam Cannon PRO V3 comes pre-installed with a 1.25mm orifice, which is ideal for machines rated 110 Bar/1595 PSI ~ 150 Bar/2175 PSI.
Spare Parts in package:
A 1.1mm orifice, suitable for machines operating 90 Bar/1305 PSI ~ 110 Bar/1595 PSI.
A 1.35mm orifice, recommended for machines rated 150 Bar/2175 PSI ~ 280 Bar/4061 PSI.
If your pressure washer falls outside these three ranges, please refer to below range to purchase the appropriate orifice size for optimal performance.
What is the pressure range for each orifice?
· 0.9mm orifice: for 50 Bar/725 PSI ~ 90 Bar/1305 PSI pressure washer
· 1.1mm orifice: for 90 Bar/1305 PSI ~ 110 Bar/1595 PSI pressure washer
· 1.25mm orifice: for 110 Bar/1595 PSI ~ 150 Bar/2175 PSI pressure washer
· 1.35mm orifice: for 150 Bar/2175 PSI ~ 280 Bar/4061 PSI pressure washer
· 1.65mm orifice: for 280 Bar/4061 PSI ~ 340 Bar/4931 PSI pressure washer
2.Confirm Your Pressure Washer Type
This foam cannon is designed for use with Cold Water pressure washers only. It is not compatible with hot water machines.
3.How to Select a Correct Foam Cannon Model? Check Here.
How to Check if the Weighted Ball is Clogged
Please read these before you order!
When there is liquid inside the bottle.
Everytime you tighten the cap on bottle.
There will be 5ml - 10ml liquid comes out from the nozzle, adapter or top valve.
It is because the air pressure inside the bottle is higher than outside.
Air pressure pressed the liquid going up through the suction tube.
This feature is only available on Pro V3.0, because MJJC Pro V3.0 has an anti-leak cap and one extra 28mm thread inside.
