






Video:
Compatible with below Pressure Washer Models#:
Ryobi R36XPWS26
Bosch GHP 5-13 C Professional
Bosch GHP 8-15 XD Professional
Lavor LVR5 145
Lavor LVR5 PLUS 150 DIGIT
Lavor PASCAL 23 PRO
Lavor VERTIGO 28 PRO
Lavor THERMIC 5 H
Kranzle PN 98K2020
Kränzle K1622 TS (Total Stop)
ARXP 170I(SKU: 15579)
LUTIAN LT701-2000A
LUTIAN LT701-2200A
LUTIAN LT701G-2100A
LUTIAN LT701G-2500A
LUTIAN LT701-2000B
LUTIAN LT701-2200B
LUTIAN LT701G-2100B
LUTIAN LT701G-2500B
LUTIAN LT703-2000A
LUTIAN LT703-2200A
LUTIAN LT703G-2100A
LUTIAN LT703G-2500A
LUTIAN LT703-2000B
LUTIAN LT703-2200B
LUTIAN LT703G-2100B
LUTIAN LT703G-2500B
LUTIAN LT703-2000C
LUTIAN LT703-2200C
LUTIAN LT703G-2100C
LUTIAN LT703G-2500C
LUTIAN LT704-2000A
LUTIAN LT704-2200A
LUTIAN LT704G-2100A
LUTIAN LT704G-2500A
LUTIAN LT704-2000B
LUTIAN LT704-2200B
LUTIAN LT704G-2100B
LUTIAN LT704G-2500B
LUTIAN LT704-2000C
LUTIAN LT704-2200C
LUTIAN LT704G-2100C
LUTIAN LT704G-2500C
LUTIAN LT707-2000A
LUTIAN LT707-2200A
LUTIAN LT707-2400A
LUTIAN LT707G-2100A
LUTIAN LT707G-2500A
LUTIAN LT707-2000B
LUTIAN LT707-2200B
LUTIAN LT707-2400B
LUTIAN LT707G-2100B
LUTIAN LT707G-2500B
LUTIAN LT707K-2000A
LUTIAN LT707K-2200A
LUTIAN LT707K-2400A
Mächtz Мойка высокого давления Mächtz MPW‑2058 X TURBO
Mächtz Мойка высокого давления Mächtz MPW-2257 TURBO
MICHELIN MPX150C 14525
F.F. GROUP HPW 145i PLUS
F.F. GROUP HPW 160i PLUS
F.F. GROUP HPW 150i PLUS
What’s New with the New Generation Foam Cannon Pro V2.0:
- 360 Degree Spray Patterns.
- Easier to foam the top and chassis of your vehicle.
- Better Foam Fan.
- New Generation Foam Technology.
- Thicker foam with less shampoo.
- Up to 30% thicker foam.
- Less noise.
- Works with as low as 90Bar(1300Psi) pressure washers.
- New Connection/Fitting.
- Easier and faster to attach fitting, no need tape or glue.
- New Tank and Cap.
- More than 1Liter capacity to wash bigger vehicles.
- Easier to attach with foam cannon body.
- Tank cap is leak proof even when you put upside down.
- More stable, robust, and durable.
M22 x 1.5mm male thread
Inner Diameter: 14mm
Before Purchasing the MJJC Foam Cannon Pro V2.0, Please Ensure the Following:
1.Check Your Pressure Washer's Operating Pressure
Your pressure washer must operate at a minimum of 50 BAR/725 PSI.
Each Foam Cannon Pro V2.0 comes pre-installed with a 1.25mm orifice, which is ideal for machines rated 110 Bar/1595 PSI ~ 150 Bar/2175 PSI.
A 1.1mm orifice is included in the package. If your machine operates 90 Bar/1305 PSI ~ 110 Bar/1595 PSI, you can replace the original orifice with the 1.1mm version for better compatibility.
If your pressure washer falls outside these two ranges, please refer to the below range to purchase the correct orifice size for optimal performance.
What is the pressure range for each orifice?
· 0.9mm orifice: for 50 Bar/725 PSI ~ 90 Bar/1305 PSI pressure washer
· 1.1mm orifice: for 90 Bar/1305 PSI ~ 110 Bar/1595 PSI pressure washer
· 1.25mm orifice: for 110 Bar/1595 PSI ~ 150 Bar/2175 PSI pressure washer
· 1.35mm orifice: for 150 Bar/2175 PSI ~ 280 Bar/4061 PSI pressure washer
· 1.65mm orifice: for 280 Bar/4061 PSI ~ 340 Bar/4931 PSI pressure washer
2.Confirm Your Pressure Washer Type
This foam cannon is designed for use with Cold Water pressure washers only. It is not compatible with hot water machines.
3.How to Select a Correct Foam Cannon Model? Check Here.